Design & material specification -
- Each alternating conductor has a total surface area equivalent to 4mm2 compromising of two flat ribbon & two solid round 5N Pure-Silver (Assay Lab Certified) conductors
- The ground conductor is a individually shielded high purity litz wire conductor reducing noise caused from parasitic capacitance and creating an ultra low impedance path to ground effectively shunting noise
Designed and built in Australia, meticulously constructed by hand from ground up, a process requiring long hours. The best possible materials have been used including lab-grade PTFE Teflon™ chosen due to tighter manufacturing tolerances'; 'the relationship between the dialectic and power cable performance is critical to achieving the most accurate tonal quality'
A High-speed design approach with advanced shielding was selected due to cables intended position running from AC wall outlet to power distribution or direct to power amplifiers
Use of Ribbon conductors was chosen effective in achieving low inductance without creating excessive capacitance largely aiding in speed of transients and attack. EMI is handled with an advanced three stage shielding system comprising of:
A proprietary metal treatment is applied to conductors surface effectively reducing noise by targeting skin frequencies that exceed 100/120 Hz
The most significant improvement in the latest version of this cable was the highly accurate positioning of conductors being critical in achieving desired level of performance along with placing each conductor dead centre within sealed air tubes:
- reducing formation of eddy currents
- providing increased resonance control
- maximising air as a dialectic with reduced contact of conductors with dialectic matter
All offering increased tonal accuracy and reducing colorations
Nano treatment is applied to each point of contact to increase electric conduction area, debase impedance and prevent oxidation
Fitted with FURUTECH FI-50 C13/C14 IEC and matching AU approved 3-Pin Power Connector other options are available
Built to comply with Australian Standards AS/NZS 3112:2000 and AS/NZS 3112:2004
* 30 day take home demo is available
* Cable is made to order and may require approximately 5 days to build and test